Mopar Metal Repair 1970 Road Runner

Every once in awhile we stumble across an "original" car, which isn't quite as un-molested as we were led to believe. Unfortunately this very low mileage B-body Mopar had some hidden history despite rarely seeing the road. 
The owner of this 1970 Plymouth Road Runner did in fact know about the previous repairs in the lower quarters, however, the rocker panel was a surprise. 1" of mud is NOT how to repair major damage. Ever. No excuses. Here we take you step by step through the repair process, to correct a horrendous repair job done several years ago. 

1970 Plymouth Road Runner being mechanically stripped of all paint

The work is just getting started. Continue reading...

1968-1970 B-Body Mopar Windshield Replacement

1970 Road Runner

1968-1970 B-Body Mopar Windshield replacement

In the event that you have to replace your windshield on your 1968-1970 B-body Mopar, you need to know what you're getting into before getting started. This is a step by step guide to the process of replacing or removing and reinstalling the original glass. 

In our example, this 1970 Plymouth Road Runner was receiving a complete paint job with interior and exterior color change. To paint a car properly, the windshield must be removed. 

Read on for our step by step process of handling the windshield. 

BEFORE: This 1970 Roadrunner will receive a complete interior and exterior color change and the vinyl top will be eliminated

Before: Existing trim and glass

Before: Existing trim and glass

1. Remove the existing stainless trim around the windshield. Careful not to bend or crease your trim, look at the clip type and location(more photos later in this post), and use a clip removal tool (looks like a forked pry bar in most cases) suitable for your application.

2. Remove the windshield gasket and glass. It is likely that you will need to cut the rubber weatherstripping gasket that is holding the glass in place to remove the glass without breaking it. There are a variety of tools made for this purpose which will allow you to cut the gasket without gouging your windshield. 

NOTE- Save any and all clips that are screwed into the body of the car which hold the trim in place. You will need these or their replacements. 

Mopar Window Repair/Replacements: 1970 B-Body

 If you need to replace the weather stripping or seals on your windows in a 1970 B-Body Mopar, and you're wondering how in the world the vent window fits back in the door properly, there is little hidden trick.

 There is a screw behind the rubber on the vertical vent window channel. When the screw is removed, you can pull the vertical piece of the vent window outward, just enough, after the whole assembly is in the door, to allow for installation of the door glass and glass guides.  See photos below.

1. All glass and trim removed from the car. The vent widow was cleaned and inspected.  This car, a 1970 Roadrunner, received all new glass channel run, felt, glass guides, hardware, and weatherstrip. You will need a phillips head screwdriver and likely PBR or WD40 to get the screw to loosen.

 

1970 Road Runner: Mopar Makeover

1970 Road Runner (Before)

This 1970 Mopar arrived at the shop with 90% original parts and featured a mere 38,000 original miles. While that is often considered desirable, the lack of updated parts(such as spark plug wires) left this Plymouth Road runner with a rough idle and in dire need of maintenance.

After closer inspections it became obvious that the blue on blue Road Runner was also in need of a face lift. Although there is something to be said for an all original time capsule, she needed some attention...